Airflow performance testing full#
Mock-ups and specialized test set-ups to determine performance of sound attenuating devices in non-standard configurations may be based on this test method but cannot be considered to be in full conformance with this test method. This standard does not provide guidance to the user on these system effects.ĥ.5 Silencers are often designed to be used under conditions which do not duplicate the test set-ups of this standard. Guidelines for appropriate maximum allowable pressure drop for a sound attenuating element have been established in the design community and are based on the procedures described herein.ĥ.4 As stated previously in 1.4 of this test method, the actual performance of a sound attenuating device as installed in an air duct system may be significantly different than reported based on the test procedure herein. Both increase with increasing air speeds thus data are required for several airflows to correctly characterize performance.ĥ.3 The aerodynamic results from testing specimens to the standard can be used as information for the system design engineer to determine the amount of static pressure drop resistance to be overcome by the system fan(s). Because silencers partially obstruct the air path and provide resistance to airflow, two other effects must be quantified: pressure drop and airflow-generated noise. Correct selection of a sound attenuating device can enable a designer to achieve in-space background noise criteria.ĥ.2 The insertion loss of a silencer varies with frequency and with the direction and speed of airflow. The device can be a component in a source-path-receiver analysis where calculations are performed to determine the resultant sound level in an occupied space. The results gathered from testing specimens to this standard can be used to estimate the reduction in fan sound levels in ducted airflow systems caused by including a sound attenuating device in the system. 5.1 Specimens tested using this standard, for example, duct silencers, are used to control sound propagation through ventilation ducts.
0 kommentar(er)
